Mubea disc springs, clamps and industrial components
High-strength springs and industrial components from Attendorn since 1916 – disc springs, spring band clamps, compression springs and precision steel tubes
Disc springs deliver high spring forces in a small installation space, and stacking them increases both force and deflection. Mubea supplies disc springs to DIN EN 16983 and to its own factory standard from stock, with outside diameters from 8 to 900 mm.
Springs thicker than 0.6 mm are shot peened as standard, so under dynamic loads they far exceed the service life required by the standard. For special requirements, Mubea designs the spring with FEM calculations, material analyses and corrosion tests in its own laboratory.
01Machine and plant engineering: valves, brakes
02Safety valves for deep-sea oil production equipment
The Mubea spring band clamp is self-tensioning: it keeps an almost constant contact pressure as temperature and pressure change, so the connection is leakproof immediately after assembly and needs no maintenance. It is made of high-tensile, alloyed 51CrV4 and 54SiCrV6 spring steel, in Mubea's own production from the rolling mill to packing.
The range covers more than 700 variants with diameters from 9 to 98 mm: standard and low-profile designs, clamps pre-opened with Handy-Clip or T-Clip, clipless and one-touch versions, and a double band clamp for high system pressures.
In-house production from raw material to finished product
Mubea develops its own production technologies and tools, and makes part of its spring steel in its own cold rolling mill. This keeps quality and delivery flexibility in its own hands throughout the process.
The family company invests around 10 percent of its turnover every year, and its employees submit some 10,000 improvement suggestions a year. The result: lighter, more durable components, from the automotive industry to mechanical engineering.
MubeaIndustrial components
About the brand
It all began with a spring
Germany's Mubea is one of the leading manufacturers of high-strength spring components and lightweight parts. The family company started in Attendorn in 1916; today it employs more than 17,200 people at 70 locations, and at least one Mubea part goes into more than 50 million new vehicles every year.
Besides the automotive industry, Mubea also makes products for industry: disc springs from standard sizes up to custom springs of 900 mm, spring band and ear clamps with the matching assembly tools, compression springs and precision steel tubes. Production is in Mubea's hands from the raw material to the finished product, and part of the spring steel comes from its own cold rolling mill. At Euro-Tools Hungary, Mubea products come with expert advice.
What does the Mubea range include?
Disc springs to DIN EN 16983 and factory standard
Custom disc springs up to 900 mm outside diameter
Spring band clamps and pre-opened versions
Ear clamps for hose and pipe connections
Assembly pliers and clamp tools
Compression springs and precision steel tubes
In-house production
From raw material to finished product, with in-house toolmaking.
Standard sizes from stock
Disc springs to DIN EN 16983 from 8 to 900 mm.
Development partner
FEM calculations, material and corrosion tests in its own lab.
Family company since 1916
Long-term thinking and short chains of command.
History
The story of Mubea
Mubea's history began on 1 August 1916, when Josef Muhr and his son founded the company in a rented 100-square-metre workshop in Attendorn, Germany, with twelve employees. In 1931 the products received their own trademark: the name MUBEA is made up of the first letters of the two owners' surnames, Muhr and Bender, and the initial of the headquarters, Attendorn.
In 1960 the Daaden plant opened, which today is also home to the disc spring business. In 1980 the first Mubea tubular stabilizer bar went into the Porsche 928, 40 percent lighter. In the following decades Mubea opened plants in the United States, the Czech Republic and China; in 2021 it took over the precision steel tube division of the Jansen Group, and in 2024 it strengthened its aviation business with the German and Hungarian activities of RUAG Aerostructures. The company is still family-run today, led by Dr. Thomas Muhr.
1916
The foundation
Josef Muhr and his son found the company in a rented 100 m² workshop in Attendorn.
1931
The MUBEA trademark
The name combines the surnames Muhr and Bender with the initial of Attendorn.
1955
Valve springs
Production of engine valve springs begins. Today Mubea is the world’s largest valve spring supplier.
1960
The Daaden plant
The Daaden plant opens; today it is the home of the disc spring business.
1980
The first tubular stabilizer
The 40 percent lighter Mubea tubular stabilizer bar debuts in the Porsche 928.
2021
Precision steel tubes
Mubea takes over the precision steel tube division of the Jansen Group.
2024
Aviation
The German and Hungarian activities of RUAG Aerostructures expand the aviation business.
Gallery
A closer look at Mubea products
Our partners
Questions about Mubea products?
Get in touch with us, or have a look around our webshops!
We use cookies that are necessary for the website to work. Cookies for statistics and marketing are only used with your consent, which you can change at any time via the “Cookie settings” link. Privacy policy